PURPOSE: To show the relationship between torque, force, lever arm and angle.
DESCRIPTION: A torque is produced on the two-meter scale by hanging a weight on the right side of the fulcrum. This torque can be balanced by pulling downward with the dynamometer with different forces at various angles on either side of the plumb line.
SUGGESTIONS: Take measurements with the two-meter scale horizontal.
EQUIPMENT: Two-meter rigid scale on support fulcrum, 1 kg mass, protractor with plumb bob, and 20 Newton dynamometer with necessary strings.
SETUP TIME: 10 min.
 |  |  |  |  |